CN
Company news

Safe use of flying deer pliers

Time:December,20,2017

When using a pliers to hold the ferrule to hold the wire, the pliers pinch the wire and wrap it in a clockwise direction.
Mouth pliers, commonly known as needle-nose pliers, is also one of the tools commonly used by electricians, especially inside electricians. Mainly used to cut thin single-strand and multi-strand wire as well as single strand wire connector bending, peeling plastic insulation.


The use of needle-nose pliers bend wire connector operation method is: first line to the left fold, and then close to the clockwise rotation of the screw clockwise to Serve.
Small nose pliers slightly modified, can be used for stripping pliers. The method is: Drill with electric drill in the sharp-nosed pliers with a cutting edge drill? 0.8 ,? 1.0mm two slots, and then respectively 1.2,1.4mm drill bit slightly expanded (Note: do not expand!), So that the two slots have a thin edge. In this way, a can cut the thread can also be a long nose pliers changed!
Wire stripping pliers for the inside electrical, electrical repairs, instrumentation, electrical tools, one of the tools. It is suitable for plastic, rubber insulated wire, cable core stripping. How to use: Place the thread to be peeled in the tip of the pliers head. Pinch the two pliers handles with one hand, and then with a loose one, the insulation is detached from the core.
Mouth pliers, commonly known as needle-nose pliers, is also one of the tools commonly used by electricians, especially inside electricians. Mainly used to cut thin single-strand and multi-strand wire as well as single strand wire connector bending, peeling plastic insulation.

[ Back]

COPYRIGHT © 2017 所有版权 广州骏鹿五金工具商行 ALL RIGHTS RESERVED 粤ICP备16019945号 Technical Support:wanpeng